Through the study, we found that the main content of maintenance and repair of briquette machine with annual production of 300 tons includes daily inspection and maintenance. It can be divided into large, medium and small repair according…
Main function of shaft lubrication of briquette machine
Good lubrication of parts of briquette machine can not only make the service life of the equipment longer, it can also reduce the energy consumption of the equipment. In the process of production and operation of briquette machine equipment, the bearing…
How to protect the briquette machine made of stainless steel material?
As we know, almost all the factories used high-quality steel for the production of briquette machine equipment. This kind of steel has good plasticity and compression and wear-resisting. The only insufficient place is that it is not waterproof. Since in the produ…
Prolong the service life of briquette machine by production control
Theoretically, good maintenance after production can prolong the service life of equipment of briquette machine, but that is not the case, because the cause of short service life of briquette machine equipment is overload production. Although the&n…
Shell material of briquette machine
As we know, the length of the service life of briquette machine cannot leave maintenance work of the equipment, including the equipment accessories, bearings, inner sleeve, propeller etc, but the maintenance work of these fittings is based on the maintenance of the sh…
Components of briquette machine
At present, the mechanical products in our country is constantly updated. Briquette machine is the molding equipment in the production of charcoal. Its internal structure production parts lay the conditions for the production of high-quality charcoal. The ru…
Parts processing and material selection of briquette machine
Most of the spare parts of briquette machine (such as the heating ring, propeller, etc) take metal rolling material as billet, so a series of processing to the machine parts and structural materials of briquette machine should be made in accordance with…
Maintenance cycle of briquette machine
Because of the large difference of each part of briquette machine in the use of production, the maintenance mode and maintenance cycle are slightly different from each other. The following is an introduction of the maintenance cycle of the propelle…
What parts of briquette machine are vulnerable?
There are basically three kinds of vulnerable parts in briquette machine: the forming sleeve, the propeller and the heating ring. However, these three types of vulnerable parts are not particularly “vulnerable”. Generally speaking, users don…
Tips for prolonging the service life of forming sleeve
Through experimental analysis, we found that the factor influence the service life of the forming sleeve in the briquette machine is the unreasonable use of temperature controller. In simple terms, the heating of the machine can not be too fast. Turning …