Adjustment of finished product density of straw briquetting machine
Straw briquetting machine is mainly composed of materials such as feeding conveyor, briquetting machine, receiving conveyor and computer control cabinet, and its work flow is simple and convenient. Its working principle is to crush the pressed straw into a uniform length, and then send the raw materials to the inlet of the briquetting machine through the feeding conveyor, and then compress and shape them at a certain temperature and pressure, and then come out from the outlet.
How to adjust the product density when using straw briquetting machine to produce products?
1. Adjust the density of briquette by the length of raw materials. When the required density is small, the raw materials are relatively long; When the density needs to be high, the raw materials should be relatively short and fine.
2. If the density is low, reduce the gasket; if the density is high, increase the gasket.
3. Adjust the density of the compact by using the wet and dry raw materials, and increase the moisture when the density is needed; Reduce moisture when high density is needed.
These are the main methods to adjust the density of the finished product of straw briquetting machine. In actual operation, we need to adopt appropriate methods to adjust the density of the finished product according to the actual situation.