Straw briquetting machine is a kind of mechanical equipment used to press crop waste such as straw into granular or blocky fuel. However, when the raw materials are too wet, it will affect the work of straw briquetting machine. Then, can the straw briquetting machine work normally when the raw materials are too wet?

First of all, we need to know the influence of raw materials being too wet on straw briquetting machine. When the raw materials are too wet, it will lead to the failure to form solid particles or block fuel during the pressing process, and at the same time, it will increase the energy consumption and loss of equipment. In addition, too wet raw materials are easy to cause equipment blockage and failure, affecting the normal operation of equipment.
We can take some measures to solve the problem that raw materials are too wet. First of all, the moisture in raw materials can be evaporated by airing or drying, so that it can reach the humidity suitable for pressing. Secondly, desiccant or additives can be added to the straw briquetting machine to help raw materials form granular or lumpy fuel better. Besides, the working parameters of the straw briquetting machine can also be properly adjusted to meet the pressing needs of too wet raw materials.
Generally speaking, too wet raw materials will have a certain impact on the work of straw briquetting machine, but it does not mean that it can’t work at all. Through reasonable treatment and adjustment, the straw briquetting machine can adapt to the pressing requirements of too wet raw materials to a certain extent, and ensure the normal operation of the equipment and achieve the expected production effect. Therefore, in practical application, we need to take corresponding measures according to the specific situation to ensure that the straw briquetting machine can effectively treat raw materials that are too wet.