After the wood crusher machine is used for a long time, there will definitely be parts wear inside the machinery. If the user only uses the crusher after buying it home, but the maintenance work is not in place, it will aggravate the wear of the wearing parts of the machine. As one of the important wearing parts of wood crusher machine, so is the blade. Many users report that the blade becomes dull after wood crusher is used for a period of time.

Today, we will discuss the causes and solutions of blade dullness.

1. The blade is not worn and becomes dull.

If the lubricating effect of the blade of wood crusher is not good, or the blade will be blunted because of wood powder sticking to the blade. In case of similar situation, clean the dirt attached to the blade, and then lubricate the blade.

2. The blade is slightly worn and blunt.

If the blade is slightly worn and dull, remove the dull wood crusher blade, and then clean it. After cleaning, grind it manually, then reinstall the blade of the wood crusher and lubricate it.

3. The blade is severely worn and blunt.

If the blade is seriously worn and has no luster, it proves that the machine has been in high-intensity production for a long time, and the maintenance work has not been done properly. In this case, the cost of blade recovery is too high, which takes time and can’t be recovered to the extent that it doesn’t affect the use, so the blade will usually be directly replaced with a new one. When purchasing a new wood crusher blade, you must choose it in combination with the model size of the wood crusher machine. Try to contact the manufacturer and choose the blade with the same material, texture and other factors to replace it, so as to ensure the overall stability of the cutter head. Don’t be greedy for cheap, and choose blade whose quality can’t be guaranteed, which will affect the use effect of wood crusher.

During the use of the wood crusher machine, we must pay attention to the use of the blade, and solve the problem of blade dullness in time to ensure the normal production of the machine.