Common faults and solutions of straw briquetting machine
Straw briquetting machine is an essential equipment for producing biomass briquetting fuel. One problem or another will always occur in the daily operation of straw briquetting machine equipment, which requires us to do a good job in maintenance. Then, if you want to press biomass briquette fuel stably, you must know the minor faults of the straw briquette machine in the work. If the straw briquette machine is not maintained in time or the sealing ring is not cleaned up in time, it will be damaged. In this case, you need to refuel on time and clean up the ash chamber on time. However, when the straw briquetting machine is in use, the bolts of the press roller fixing frame and the bolts of the die are loosened, resulting in the vibration of the frame. After checking this situation, the bolts should be tightened immediately.
Long-term maintenance and cleaning or oil cut-off will cause damage to the wearing parts of the bearing. Therefore, the bearing chamber of the pressing roller of straw briquetting machine should be cleaned regularly by oiling and replacing the sealing ring according to the regulations. Insufficient gear lubricating oil or long-term non-replacement will lead to increased noise, which will reduce the service life of straw briquetting machine equipment for a long time. During the use of straw briquetting machine, sufficient grease must be added, and high-temperature grease must be used.
We must know more about the common faults of straw briquetting machine and their solutions, so that we can reduce our daily maintenance time, prolong the service life of straw briquetting machine and improve efficiency. With the continuous development of science and technology, biomass briquette equipment is constantly updated to adapt to the development of society and meet the needs of users for high-efficiency rolling straw briquetting machine equipment.