Difficulties in operation of straw briquette machine
The operation of straw briquette machine may be challenging, and appropriate training is needed to ensure safe and effective use. Today we will discuss some common difficulties in operating the straw briquette machine and provide some skills on how to overcome these difficulties.
1. Feeding the machine
One of the most critical steps in operating the straw briquetting machine is to add a proper amount of materials to the machine. Overload of the machine will damage the equipment, while insufficient load will lead to the decline of the quality of briquettes. In order to ensure the best performance, the manufacturer’s instructions on the recommended feeding speed must be followed and adjusted according to the type and moisture content of straw.
2. Adjusting the compression ratio
Compression ratio is the key factor to determine the quality of the briquette. The higher the compression ratio, the greater the density of briquettes, but it also needs more energy, which may increase the wear and tear of the machine. On the contrary, a lower compression ratio will produce a softer briquette, which is easier to break. It is important to adjust the compression ratio according to the desired result and the type of straw used.
3. Controlling the moisture content of straw
The moisture content of straw is another key factor in the quality of briquette. Too much or too little moisture will affect the quality of straw briquette. Therefore, the moisture content of straw must be controlled before it is sent to the machine, and it can be controlled by drying or adding water if necessary.
4. Maintaining the machine regularly
Maintaining the machine regularly is very important to keep the straw briquette machine running efficiently and safely. This includes cleaning the machine after each use, checking and replacing worn or damaged parts, and lubricating moving parts as needed. Failure to maintain the machine will lead to performance degradation, energy consumption increase, and even potential safety hazards.
5. Make sure it is safe
When operating the straw briquetting machine, safety should always be the top priority. Operators should be trained in proper operation and safety procedures, such as wearing appropriate personal protective equipment, avoiding loose clothes or jewelry, and keeping hands and other body parts away from moving parts. When using the machine, it is also important to follow all the instructions and warnings of the manufacturer.
In a word, the operation of straw briquetting machine needs careful attention to details and proper training to ensure safe and effective use. By following these tips, operators can overcome common difficulties and produce high-quality briquettes for various applications.