Wood crusher machine is an essential equipment in the production of sawdust briquette machine. The purpose of the wood crusher machine is nothing more than crushing materials, then how to choose the wood crusher machine according to different raw materials?

1. According to the crushing raw materials.
To crush grain feed mainly, you can choose the top feed hammer mill; to crush bran and wheat feed based materials, the claw crusher can be used. If good versatility is required, such as to crush cereal mainly and some cake grain and straw, you can choose the tangential feeding hammer mill. When crushing shell and other mineral feed, non-sieve shell crusher can be selected. If it is used as the pretreatment of premixed feed, and it requires that the particle size of product grinding is very fine and it can be adjusted according to the need, you should choose the special non-sieve grinder.
 
2. According to the matching power.
The machine manual and nameplate contain the power kilowatts of the motor supporting the crusher. It often indicates not a fixed number, but a certain range. There are two reasons: one is that the power required to crush different raw materials varies greatly. For example, under the same working conditions, the power required to crush sorghum is twice as much as that required to crush corn. Second, when using different sieve holes, it has a great impact on the load of the crusher.
 
3. According to the layout.
The finished products of grinding can be discharged through the discharge device by three ways: self-weight blanking, negative pressure suction and mechanical transport. Small single machine mainly adopts self-weight blanking method to simplify the structure. Most medium-sized pulverizer has negative pressure suction device. The advantage is that it can absorb the water of the finished product and reduce the humidity in the finished product, which is conducive to storage. It can improve the crushing efficiency of 10-15% and reduce the dust of the crushing chamber.
 
4. According to the dust and noise.
The dust and noise in feed processing mainly come from the crusher. The two indexes should be taken into full consideration when selecting the model. If you have to choose the high noise and dust crusher, you should take the muffler and dust prevention measures in order to improve the working environment, which is conducive to the health of operators.
 
Our company provides all types of wood crusher machine, sawdust briquette machine, carbonizing furnace and other equipment for making high quality briquettes and charcoal. If you are interested in our equipment, you can contact us by emails to get more information of our sawdust briquette machine.