How to maintain the blade of wood crusher machine?
Wood crusher machine is a kind of equipment commonly used in briquette production line, which is mainly used to crush and process wood into appropriate size. When the wood crusher works, it is usually takes a long-term and high-intensity operation, so that after continuous use for a period of time, the mechanical wearing parts will inevitably be worn. Therefore, the follow-up maintenance is very important. The blade, bearings, screens, etc. inside wood crusher are easy to wear. Today, we will focus on the maintenance of blade.
As the main accessory of the wood crusher, the sharpness of the blade determines the output. Generally, blades are made of alloy steel, that is, two different materials are welded together at high temperature. When feeding, you should pay attention not to enter objects such as iron pieces and stones; Feeding can’t be fast or slow, and it must be evenly fed; When the machine stops, stop the feeding first, and stop the machine when the product is finished.
Before wood crusher works, check whether the bearing of the machine is short of oil, to see the sharpness of the blade and whether there are gaps in the blade. When the above situation is found, please fill up the oil or replace a pair of blades and install them in the boot. Please add a little water when drying the wood at work, because the blade rubs at a high speed when breaking the wood, which will generate high heat, and water is needed to cool it down. Wet wood does not need water, because it contains water, which can reduce the temperature of the blade.
After a period of use, the blade should be taken off and re-polished, so as to ensure its sharpness and work efficiency. Every once in a while, the lubricating oil should be replaced for the bearing, which can effectively prevent the bearing from overheating during operation and ensure the normal work and production of wood crusher.