Influencing factors of peeling speed of wood barking machine
Wood barking machine is a kind of equipment commonly used in wood processing industry. Its main function is to remove bark from the surface of wood, so as to prepare for the subsequent processing procedures. Peeling speed is one of the important indexes to measure the performance of wood barking machine, which directly affects the production efficiency and cost. The following are the main factors that affect the peeling speed of wood barking machine:
Wood types and characteristics
Different kinds of wood have different hardness, density and bark adhesion. For example, the bark of pine is loose and peeling is relatively easy; However, the bark of oak is tough and difficult to peel. These characteristics will directly affect the working efficiency of the barker.
Humidity of wood
The moisture content of wood has a significant effect on the peeling speed. Wood bark with high humidity is usually easier to fall off, while dry wood bark is closer to the wood surface, which increases the difficulty of peeling. Therefore, in practical operation, properly adjusting the humidity of wood can improve the peeling efficiency.
Types and design of the machine
There are many kinds of wood barking machine in the market, including drum barker, chain barker and knife barker. Different types of equipment are suitable for different wood and production needs. In addition, the technical parameters such as cutter design, rotating speed and power of the wood barker will also significantly affect the peeling speed.
Setting of operating parameters
Correctly adjusting the operating parameters of the wood barking machine, such as feeding speed, cutter angle and pressure, is very important to improve the peeling speed. If the parameters are not set properly, it will not only reduce efficiency, but also cause damage to equipment and wood.
Wood size and shape
Factors such as the diameter, length and bending of wood will also affect the peeling speed. Wood with larger diameter or higher bending degree may need more time to be treated, so it is necessary to choose appropriate equipment and operation methods.
Equipment maintenance status
Regular maintenance of the barker is an important condition to ensure its efficient operation. If the equipment tool is worn or the parts are aging, the peeling efficiency will be directly reduced. Therefore, keeping the equipment in good working condition is an important guarantee to improve production efficiency.
To sum up, there are many factors that affect the peeling speed of wood barking machine, including the characteristics of wood itself, equipment performance and operating conditions. In actual production, appropriate equipment should be selected according to specific conditions, and operating parameters should be reasonably adjusted to achieve the best peeling effect and production efficiency.
————————————————————————————————–
Learn more :
Will the rough wood affect the work of wood barking machine?
Wood barking machine is a common wood processing equipment, which is widely used in wood processing plants, paper mills and wood products production enterprises. Its main function is to remove bark from wood surface and provide higher quality raw materials for subsequent processing. However, the r…