Is the vibration of straw briquetting machine normal when it is used?
Straw briquetting machine is a professional equipment for briquetting crop wastes such as straw. In the process of using straw briquetting machine, many users will find that the machine will vibrate to some extent when working. Is this a normal phenomenon?
First of all, we need to make it clear that it is normal for the straw briquetting machine to produce certain vibration when working, which is caused by the internal operation of the machine and the compression of materials. However, this vibration will not affect the normal operation of the machine, nor will it pose a threat to the safety of users. However, if the vibration is too large, you need to consider whether there is a fault or improper use.
So, how to judge whether the vibration of straw briquetting machine is normal? Generally speaking, we can judge from the following aspects:
1. Observe whether the appearance of the machine is abnormal. If the appearance of the machine is intact and there is no obvious deformation or looseness, then the vibration may be normal.
2. Check the fixity of the machine. If the machine is not fixed properly or firmly, it will cause excessive vibration. Therefore, it is necessary to check the fixation of the machine before use to ensure its stability.
3. Check whether there is a fault inside the machine. If there are faults inside the machine, such as bearing wear and gear damage, it will also lead to excessive vibration. At this time, it is necessary to repair or replace parts in time.
4. Check the status of straw. If the straw is too dry or too wet, it will affect the pressing effect and cause the machine to vibrate greatly.
In a word, it is normal for the straw briquetting machine to vibrate to some extent when it is used, but if it is found that the machine has abnormal vibration, it should stop using it immediately and contact professionals for treatment. Only in this way can we ensure the normal operation of the machine and prolong its service life.