Main reasons for the difficulty in starting the wood crusher machine
Wood crusher machine is a kind of equipment commonly used in wood processing industry, which can crush the original wood and make it easier to process and use. However, sometimes it is difficult to start the wood crusher machine, which will affect the production efficiency and the service life of the equipment. So, what is the reason for the difficulty in starting the wood crusher?
The main reasons for the difficulty in starting the wood crusher machine are as follows:
1. Power supply problem. Power supply problem is one of the common reasons that lead to the difficulty of starting wood crushing machine. If the power supply voltage is unstable or the wires are damaged by aging, it will lead to insufficient current or failure to start the equipment. At this time, it is necessary to check whether the power supply voltage is stable and replace the aging and damaged wires to ensure the normal power supply of the equipment.
2. Mechanical parts problem. The mechanical parts of wood crusher include gears, belts, transmission shafts, etc. If these components fail, it will also make it difficult to start the equipment. For example, the aging of transmission belt and gear wear will affect the normal operation of the equipment.
3. Motor problem. The motor of wood crusher machine is the key component to drive the equipment to run normally. If the motor fails, it will make it difficult to start the equipment. Common motor faults include bearing damage, winding burning and line aging.
4. Wear problem. After the wood crusher machine is used for a long time, the internal parts of the equipment will be worn, such as blades and screens. If the wear is excessive, it will make it difficult or impossible to start the equipment. At this time, it is necessary to overhaul the equipment and replace the seriously worn parts.
5. Cleaning issues. In the process of using wood crusher, a large number of debris such as sawdust and dust will be produced. If it is not cleaned in time, the normal operation of the equipment will be affected. In the process of cleaning, it is necessary to pay attention to safety and avoid accidents.
6. Overload problem If the load of the wood crusher is too large in the working process, it will lead to the difficulty in starting the equipment. This may be due to the processed wood being too hard or too thick, or the unreasonable design of the equipment itself.
7. Improper operation. Improper operation is also one of the reasons why it is difficult to start the wood crusher. For example, failure to operate the equipment according to the correct procedures or failure to operate the equipment according to the regulations will make it difficult or impossible to start the equipment. At this time, it is necessary to train and guide the operators to ensure the standard operation.
In addition to the above reasons, there are some other problems that may also lead to the difficulty in starting the wood crusher machine. For example, the equipment has not been used for a long time, resulting in internal dust accumulation and poor wire contact.
In a word, we need to investigate and solve the problem of difficult start-up of wood crusher machine from many aspects. Only by ensuring the normal operation of the equipment can the production efficiency and processing quality be improved.