Matters needing attention in the use of biomass briquette machine
In the use of biomass briquette machine, sometimes we need to replace the bearing or do some maintenance, then master bearing installation and maintenance methods is very necessary.
During the installation and maintenance of the bearing of the briquetting machine, what should you do if the bearing is too heavy to be mounted? In fact, it is very simple, just use oil or gas to make the bearing heating, you can install. However, it is necessary to pay attention to the axis and bearing internal control dimensions do not deviate too much.
The adjustment of the triangle belt of biomass briquette machine should be moderate, too tight and too loose are not good for production, too tight of the triangle belt adjustment will lead to the motor bearing heating. When the adjustment is too loose, the speed of the motor will be reduced. The triangle belt of biomass briquette machine is also easy to slide, which will affect the service life of the machine. When adjusting the tightness of the v-belt, the bolts of the motor base should be loosened before adjusting. The adjusting bolts can change the position of the motor. After the v-belt reaches the proper tightness, the loosened bolts should be tightened.
The power cord of the biomass briquette machine motor must not be too far from the main equipment or be wound. This is very easy to cause the motor under-voltage or under-current, causing the motor heating too fast and burn out the motor. Attention should also be paid to the use of motors for biomass briquette machine. In the use of biomass briquette machine, if the motor fails, the output of biomass briquetting machine will be reduced. Therefore, we need pay special attention to the use of motor, when we use the motor for a period of time, we need to refuel or open the motor to clean bearings, refill lithium-based lubricating oil, to ensure the lubrication of biomass briquette machine bearings.
In short, in the use of biomass briquette machine, pay more attention to the equipment, thus can extend the service life of the machine, and bring greater economic benefits.