There are many different types of carbonizing furnaces. Now, the environmental protection continuous bamboo crumb carbonizing furnace is commonly used in the market, which can crush the combustible crop waste stalks such as corn stalks, straws, peanut skins, bean stalks, flowers and firewood, etc., thus preventing these crop straws from burning in vain, protecting the environment well and effectively developing renewable energy. This kind of machine is reliable in performance, simple and convenient to operate, and has a wide range of raw materials. It can be used for burning crop waste stalks such as corn stalks, straws, peanut peels, bean stalks, flowers and firewood, etc.

Matters needing attention when using environmental protection continuous bamboo crumb carbonizing furnace:

1. Check whether there is any foreign matter in the crushing chamber (it must be empty before starting) and turn on the power supply.

2. Tighten the butterfly nuts of the upper cover and the crushing chamber.

3. Start the motor, rotate for 1-2 minutes when the machine is empty, and then gradually feed the materials from the feeding tray. Feeding should not be too fast or too much.

4. If the material gets stuck and the motor doesn’t turn, please turn it off immediately to prevent the motor from burning. After the stuck material is cleared, it can continue to be used.

5. In use, it is forbidden to open the upper cover and reach into the crushing cavity with your hands.

6. Bamboo crumb carbonization furnace belongs to dry pulverizer, so it is not suitable for crushing wet and greasy substances.

7. Ask users to change different screens as required. 8. Generally, the carbonization furnace equipment adopts overheat protector. If the motor load is too large, it will stop automatically. If you continue to operate, please press the protector again.