Matters needing attention in using straw briquetting machine in winter
Winter is the key period for the use of straw briquetting machine. In this season, the cold weather and high humidity put forward higher requirements for the use and maintenance of straw briquetting machine. Let’s take a look at the precautions for using straw briquetting machine in winter.
First of all, we should pay attention to keep the straw briquetting machine clean. Due to the high humidity in winter, straw is easy to absorb water, which will lead to the corrosion of the internal structure of straw briquetting machine. Therefore, before using the straw briquetting machine, the inside of the machine should be cleaned and maintained regularly.
Secondly, we should pay attention to the quality of straw. In winter, due to the cold weather, straw is easy to become dry and fragile, which will lead to the fragility of straw during briquetting. Therefore, before using straw briquetting machine, straw should be screened and treated to ensure its quality meets the requirements.
Thirdly, we should pay attention to the control of pressure. In winter, due to the low ambient temperature, the viscosity of lubricating oil will increase, which will lead to the increase of the resistance of lubricating system, thus affecting the pressure control. Therefore, before using the straw briquetting machine, it is necessary to check whether the lubrication system works normally and make necessary adjustments and maintenance.
Finally, we should pay attention to safety issues. When using straw briquetting machine, we should pay attention to safe operation and abide by relevant operating rules and safety standards. At the same time, in the process of operation, we should pay attention to observe the running state of the machine and find and eliminate faults in time.
In a word, when using straw briquetting machine in winter, we should pay attention to keeping the machine clean, controlling pressure, paying attention to safety issues, and screening and processing straw to ensure the normal operation of the machine and improve production efficiency.