To achieve high-quality briquette production, the operator of straw briquette machine not only need to make strength restrictions on pressurize the accessories, but also take into account whether the motor of straw briquette machine can meet the output volume of continuous briquette production; when using the straw briquette machine to produce briquettes, the reason that causes the mechanical losses in the process is that the operator does not comprehensively consider these two factors.

To start with the strength of pressurizing accessories. Although increase the strength of accessories of straw briquette machine can get better molding density of raw material, the premise of pressurizing is that raw materials can withstand the pressure range, otherwise it will lead to the mechanism failure of straw briquette machine. The second point is that the the operator is not taking into account whether the motor can meet the demand of output volume after pressurizing the strength of accessories of straw briquette machine. Once it failed to meet or exceed the power consumption of the motor, it will also result in the mechanical failure of straw briquette machine. In the production of straw briquette machine, customers should not pressurize the accessories arbitrarily. When necessary, the operator should also make reasonable adjustment on the motor according to the condition of pressurizing, so as to avoid the mechanical loss in the production of straw briquette machine.
By practice analysis, we found two main factors that would lead to the uneven density of briquettes produced by straw briquette machine, they are the temperature fluctuation and temperature control in the process of briquetting. The following is the detailed description.
 1.Temperature fluctuation: temperature fluctuation in the process of making briquette would result in changes in the viscosity of raw materials, further resulting in pressure and flow rate fluctuations so that uneven density of briquettes would appear.
2.Temperature control: improper heating control of the operator would lead to the fluctuations of the polymer viscosity in the forming cylinder and the surface, which would also result in uneven density of straw briquette machine. There are many other reasons, such as the feeding way of the briquetting, leakage, the physical response of the material, the design and manufacture of the forming cylinder and rheological property of material, etc. For more detailed information, please feel free to contact us. As the professional manufacturer of straw briquette machine, KMEC warmly welcome customers of all countries to visit and purchase our straw briquette machine.