Straw briquette machine is a device that crushes and compresses biomass raw materials such as straw to make efficient and environmentally friendly fuel or feed. After practice and continuous improvement, the straw briquette machine has been improved day by day. Straw briquette machine has the advantages of high automation, high output, low price, low power consumption, simple operation and no pollution to the environment. Therefore, the straw briquette machine can be widely used to press various biomass raw materials such as crop straws and twigs. In the use of any machinery, we must master certain safe use norms, especially the straw briquette machine. So how to use the straw briquette machine safely?

The safe use specifications of straw briquette machine are as follows:

1. At the end of the day’s work, don’t stop the straw briquette machine in a hurry. Be sure to add raw materials with high moisture content to the equipment extrusion room as the bottom material to prevent the next production from blocking.

2. Check the impurities of the processed raw materials before normal feeding to prevent hard impurities such as metal impurities and stones from damaging the parts of the briquette machine.

3. The straw briquette machine we produce doesn’t need to be fixed on the ground, but the ground of the work site bearing the briquette machine production line must be hardened, and it is a plane rather than a pit. The best way is not to move the briquette machine production line frequently. 

4. Every time you start the briquette machine, first test whether the rotating parts of the equipment are normal and whether all parts that need lubrication are well lubricated;

5. After the equipment installation is completed, under the guidance of technicians, carefully check the fastening degree of each line, whether the bearings are balanced and whether the tightness of transmission parts is appropriate.

6. The oil supply of briquette machine is automatic, but when working for more than 300 hours, the equipment oil should be replaced and added.

7. Every time it is used, idle for a period of time to see if there is any abnormality. If there is any abnormality in normal production, stop the machine for investigation at the first time.

8. If manual feeding is used, the operator must stand on the side of the equipment to prevent accidental injury of ejectors.

In the process of using straw briquette machine, the machine will inevitably have such and such failures, some of which are difficult to avoid, while others can be prevented in advance. Therefore, understanding and abiding by the safe use norms of straw briquette machine plays a very important role in reducing machine failures, safe production and prolonging machine service life.