The raw material moisture of biomass briquetting machine should be controlled well
The working principle of the biomass briquetting machine is very simple, is use the briquetting equipment to compress agricultural waste into efficient, environmentally friendly fuel. In fact, if you go back to the original production of the biomass briquetting machine, this machine is a very simple equipment.
However, with the increasing demand for the biomass briquetting machine, the briquetting equipment has also been greatly improved. It must be said here is that now the level of automation of the biomass briquetting machine has been very high. There has been a significant reduction in energy consumption. This is also in line with the current energy-saving green features. This also caused the hot scene of biomass briquetting machine now.
When the raw material passes through the die hole, the wet raw material produces a huge pressure, this can cause the speed to be very slow, affects the raw material discharge and the output of the biomass briquetting machine. When the moisture of raw material is too large, the briquettes will be very soft, very loose, it is impossible to achieve both smooth and dense ideal state, so the control of raw material moisture is very necessary.
During the production of biomass briquetting machine, the humidity should be kept at 10-15%. If the raw material is too wet, we can use drying method to achieve the normal operation of biomass briquetting machine, raw material moisture must not be too big, otherwise it will directly affect the output and molding rate and equipment life.