Straw briquetting machine is a kind of equipment used to press crop waste such as straw into granular or lumpy fuel, which is widely used in agriculture, forestry and other fields. However, there are also some problems in the use of straw briquetting machine, among which the following are the most feared:

First of all, the straw briquetting machine is most afraid of impurities in raw materials. Due to the wide sources of crop wastes such as straws, weeds and impurities may be mixed with them. If these impurities enter the briquetting machine, it will cause serious damage to the equipment and even lead to equipment failure. Therefore, when using straw briquetting machine, raw materials must be strictly screened and cleaned to ensure the purity of raw materials and avoid impurities from damaging the equipment.

Secondly, the straw briquetting machine is most afraid of high moisture content of raw materials. If the moisture content of raw materials is too high, the quality of granular or lumpy fuel will not reach the standard during the pressing process, and even lumpy fuel cannot be formed. At the same time, too high moisture content will also increase the energy consumption of equipment, reduce production efficiency, and even cause overheating and blockage of equipment. Therefore, when using straw briquetting machine, it is necessary to control the moisture content of raw materials to ensure that it is within a suitable range to ensure production efficiency and product quality.

Thirdly, the straw briquetting machine is most afraid of not maintaining the equipment. As a kind of mechanical equipment, the straw briquetting machine will be worn and loose after long-term operation. If it cannot be maintained in time, it will accelerate the aging and damage of the equipment. Therefore, when using the straw briquetting machine, it is necessary to maintain the equipment regularly and replace the worn parts in time according to the requirements in the equipment manual to ensure the normal operation of the equipment.

To sum up, the straw briquetting machine is most afraid of impurities in raw materials, high moisture content and irregular maintenance of equipment during use. Only by strictly controlling the quality of raw materials, controlling the moisture content of raw materials and maintaining the equipment regularly can the normal operation and production efficiency of straw briquetting machine be guaranteed. Only by solving these problems seriously can we give full play to the role of straw briquetting machine in agricultural production.