Wood crusher machine is a professional equipment for crushing all kinds of wood wastes. When used in wood crusher machine, the equipment sometimes gets hot, there are some reasons for this.

The hot phenomenon is mainly caused by the following factors:

Wood crusher machine is a simple equipment in wood equipment, but installation and debugging is not a simple matter, which requires professional technicians to install and debug, so as to ensure the normal operation of the equipment. Incorrect installation will lead to such problems.

1, Incorrect installation.

Wood crusher machine is a simple equipment in wood equipment, but installation and debugging is not a simple matter, which requires professional technicians to install and debug, so as to ensure the normal operation of the equipment. Incorrect installation will lead to such problems.

2, Insufficient lubricating oil.

In fact, as a mechanical product, lubricating oil is very important, so it is necessary to check the situation of lubricating oil in the market. Whether it is reduced or polluted, it is easy to cause overheating of bearings, and the temperature inside the crushing cavity continues to rise until it becomes hot.

3, Uneven feeding.

Improper use of the wood crusher, long and short feeding time, making it work under overload for a long time will cause overheating in the crushing cavity, and even burn out the motor in serious cases.

4, The discharge port is blocked.

If the outlet is blocked, the crushed materials are not discharged smoothly, and more and more materials are accumulated in the crushing cavity, and the crushing pressure is also increasing, then the heat in the crushing cavity can not be released in time, and overheating will occur if it goes on for a long time.

5, Hammer counterweight imbalance.

In fact, it is possible that the wear degree of two adjacent hammers is different, or that the weight of a new hammer is not equal. If the hammer head is unbalanced, it will easily cause vibration during the operation, which will not only cause uneven crushed materials, but also cause the machine to overheat.

6, Bearing overheating. 

Most of the causes of bearing overheating indicate that the big shaft is unbalanced or there is something dirty in the bearing. If this is the case, stop the machine for maintenance or contact the after-sales service of the machinery manufacturer to help solve it. 　

If there is a high temperature phenomenon in wood crusher machine, we must quickly find out the cause of the problem and solve it, so as not to delay the use of equipment; At the same time, understanding the cause of the failure is also the key for us to take effective measures.