What should be paid attention to when using straw briquetting machine in summer
Straw briquetting machine is a device that crushes and compresses biomass raw materials such as straw to make efficient and environmentally friendly fuel or feed.
Straw briquetting machine consists of feeding conveyor, compressor and discharger. Compressor consists of frame, motor, feed inlet, transmission system, pressure roller, ring die, electric heating ring, discharge outlet and so on. When the straw briquetting machine works, firstly, the straw or grass to be pressed is chopped or shredded, the length is controlled below 50mm, and the water content is controlled within 10-25%. Then, the material is sent to the feed inlet by the feeding conveyor, and the pressing roller is driven to rotate by the rotation of the spindle. After the rotation of the pressing roller, the material is forced to be squeezed out of the model hole in blocks, and falls from the discharge outlet, and is packaged after cooling.
Due to the high temperature in summer, the straw briquetting machine is more likely to break down when it is used. So what should we pay attention to when using straw briquetting machine in summer?
First of all, at noon, the highest temperature in a day, stop the machine running and do a good job of shading and other maintenance to avoid production accidents caused by temperature. Second, do a good job in fire prevention. Fire prevention is very important for raw materials. In addition to the preservation of raw materials, the preservation of finished products is also very important. Be sure to keep them away from fire sources and keep them in a cool place, and it is best to avoid direct sunlight.
Third, when the straw briquetting machine is running, we should always pay attention to the temperature of all parts, and once the temperature is found to be too high, we should stop and rest, in order to prevent the parts and even the whole equipment from being damaged.
Finally, pay attention to the humidity control of crushed raw materials, because the moisture problem will also directly affect the production of straw briquetting machine.