Wood crusher machine is not suitable for crushing wet wood
Wood crusher machine is a new type of wood working machinery equipment which is ideal for the previous production of wood series. The components of wood crusher machine are mainly composed of casing, bearing, screen, driving wheel and trough frame, and all materials are cast by manganese steel. The main engine adopts alloy cutter head, which also improves the output. It has the crushing functions of coarse crushing, fine crushing and centrifugation, and the motor drives the rotor of the crusher to run at high speed, so that the high-speed airflow generated by the wood crusher machine produces high-strength impact force, compression force and cutting force on the crushed materials, and achieves the crushing function.
There are many materials that can be crushed by wood crusher equipment, but several of them are not suitable for crushing, and wet wood is one of them. The main reason is that wet wood contains a lot of water, and after it is crushed in the crusher equipment, the screen aperture will be blocked, which is very unfavorable for the output. For example, if one ton can be produced in one hour at ordinary times, if the wet wood is crushed, it may only be about seven or eight hundred kilograms, so this is why the wet wood is not suitable for crushing equipment.
In addition to affecting the output, crushing wet wood is not good for cleaning the inside of the equipment. This is because after crushing, wet wood will become sawdust or sawdust, which is easy to adhere to the materials such as blades, shells and cutter heads, so it is not good for cleaning the inside of the equipment. There are many reasons why wet wood is not suitable for crushing. Of course, we are talking about wood with a water content of more than 40%. If it is below, it can be directly crushed, because the wood crusher machine itself is rotating.