Biomass densification is the bonding together of waste biomass product, such as wood chips or sawdust, peanut husk, rice husk, sunflower seed husks, bagasse (sugar cane or sugar beet residue), coffee shells, coconut husks, etc. The bonding is achieved by the pressure and heat of the biomass brique…
Impact of spices of raw material to the cracks of biomass briquette
Sawdust has the best briquetting performance, and after the sawdust, it is corn straw and cotton straw, the worst effect of briquetting is the processing wood wastes. According to estimation, the worst for processing is the residues of decorations, it has big difference with pure sawdust which is …
Problems need to be solved in the development of biomass energy
Biomass fuel is the fourth largest energy next to coal, oil and natural gas. It is a new type of clean fuel produced through compression of biomass pellet mill or briquette machine. As the renewable energy, biomass fuel occupies an important position in the whole energy system. “the availabl…
Analysis of the briquette fracture and spark in the production of biomass briquette machine
When we use the biomass briquette machine to produce biomass briquette, sometimes the briquette produced may break and even lead to the crash of biomass briquette machine that can not work normally. Since restart of the biomass briquette machine is quite troublesome, so how to quickly find out the…
The cause of banging noise of biomass briquette machine
Sometimes, the banging noise would appear in the process of biomass briquette machine, it may be caused by the following reasons: Biomass briquette machine (1) improper temperature control;(2) too large moisture content of raw materials;(3) the wear of pro…
The production principle and advantages of biomass briquette machine
Biomass briquette machine is also called briquette molding machine. It is an essential part of mechanism charcoal production. Granular wastes with the length of less than 5mm and diameter of less than 3mm, such as bamboo, wood, shells, straw can be processed into rod-shaped solid briquettes w…
Production section of biomass briquette machine
The production of biomass briquettes with biomass briquette machine can be divided into several sections, including crushing, drying, briquetting, cooling, screening and packing section. As a professional manufacturer of briquette machine for sale, KMEC would give a brief introduction of…
What promote the rapid development of biomass briquette machine?
In traditional crops recycling industry, the utilization rate of straw crops in our country is about 33%, and utilization rate of crops through technology processing is only about 23%. However, most of them are not processed and the utilization rate is extremely low, thus it is really a huge waste…
What materials are more suitable for making briquettes?
What materials are suitable to be used as the raw materials of biomass briquetting plant for sale? As we know, on the choice of the raw material, biomass briquetting plant for sale often take materials containing higher lignin, such as straw and branches as raw materials to produce briquettes…
The safe packing of finished product of briquette machine
The packing of the finished product of briquette machine can be divided into three types depending on the storage environment: insect-resistant packaging, moisture-proof packaging and shockproof packaging. Packing of charcoal Generally speaking, if the manufactu…