As we know, almost all the factories used high-quality steel for the production of briquette machine equipment. This kind of steel has good plasticity and compression and wear-resisting. The only insufficient place is that it is not waterproof. Since in the produ…
Prolong the service life of briquette machine by production control
Theoretically, good maintenance after production can prolong the service life of equipment of briquette machine, but that is not the case, because the cause of short service life of briquette machine equipment is overload production. Although the&n…
Shell material of briquette machine
As we know, the length of the service life of briquette machine cannot leave maintenance work of the equipment, including the equipment accessories, bearings, inner sleeve, propeller etc, but the maintenance work of these fittings is based on the maintenance of the sh…
Components of briquette machine
At present, the mechanical products in our country is constantly updated. Briquette machine is the molding equipment in the production of charcoal. Its internal structure production parts lay the conditions for the production of high-quality charcoal. The ru…
Parts processing and material selection of briquette machine
Most of the spare parts of briquette machine (such as the heating ring, propeller, etc) take metal rolling material as billet, so a series of processing to the machine parts and structural materials of briquette machine should be made in accordance with…
Maintenance cycle of briquette machine
Because of the large difference of each part of briquette machine in the use of production, the maintenance mode and maintenance cycle are slightly different from each other. The following is an introduction of the maintenance cycle of the propelle…
What parts of briquette machine are vulnerable?
There are basically three kinds of vulnerable parts in briquette machine: the forming sleeve, the propeller and the heating ring. However, these three types of vulnerable parts are not particularly “vulnerable”. Generally speaking, users don…
Tips for prolonging the service life of forming sleeve
Through experimental analysis, we found that the factor influence the service life of the forming sleeve in the briquette machine is the unreasonable use of temperature controller. In simple terms, the heating of the machine can not be too fast. Turning …
The moisture content of the raw material and the drying speed
The raw material of briquette machine should be dried before making briquettes and charcoal, otherwise it would affect the production quality of charcoal. The moisture content of raw material also restricts the drying speed to a certain extent. The lower the mois…
Application of automatic temperature control in briquette machine
With the improvement of people’s living standards, higher requirements for quality of life and living environment are also put forward. Aiming at the social situation and opportunity, some customers purchased the whole set of briquette machine equipment. Pe…