Charcoal production with briquette machine and carbonizing usually need four steps: crushing stage, drying stage, molding and carbonizing stage. Each link in these steps has its own notices. For example, in the crushing stage, users need to control the …

Compared with the inspection before crushing, briquetting and drying, the inspection of carbonizing furnace before production is quite simple, since all kinds of spare parts in crushing, briquetting and drying need to be checked before production. …

The quality of charcoal produced by briquette machine is the problem most concerned by the manufacturers, which determines the price of charcoal. Advanced charcoal production technology and  maintenance of the equipment can effectively enhance the …

When in the use of the carbonizing furnace for processing of briquettes produced by biomass briquette machine, the first thing we need to do is ignite. Ignition of carbonizing furnace is the process that you can not look down upon. Correct ignition can bring high…

The coal resources are declining due to excessive exploitation, and the presence of briquette machine solves the problem. The charcoal produced by briquette machine is popular emerging fuel with high heat, low cost and wide application. Charcoal production with briquette machine Briquette ma…

Accurate control of temperature is important no matter in drying, briquetting or carbonizing process. A little difference in the temperature may produce two kinds of different mechanism charcoal. In order to ensure the quality of charcoal produced by briquette machine, the operator need to control…

Carbonizing furnace is a key step in the production of carbonized charcoal. Carbonization is the high temperature operation, and there are many matters needing attention during the operation. Paying attention to details can ensure the quality of products. The following is about the safety producti…

The equipment used in charcoal production line usually includes wood crusher machine, dryer, briquette machine, carbonizing furnace and the auxiliary equipment usually includes the conveyor, cooler and packaging machine. Then, which equipment is optional in the charcoal production line? It should …

As we know, the main four devices in the production of charcoal are the crusher, the dryer, the briquette machine and the carbonizing furnace. The four kinds of equipment have a variety of models and the output of each type of equipment are different. Thus, we need to configure the equipment accor…

As we know, there are a lot of materials that can be used to make charcoal, such as sawdust, crop stalks, tree bark, waste materials of lumber mill, etc. Then, is it possible to make charcoal with herb residuals by briquette machine and carbonizing furnace under normal conditions? The answer is ye…