Methods of solving heavy moisture of raw material

Raining and heavy frog often causes high moisture of raw material when we use the biomass processing equipment. It would affect the quality of Charcoal / Biomass briquette seriously. We must pay attention to moisture and dry the material one more time. Then what we should do during the production of drying process?



High-speed hot air stream is often used in the biomass briquette processing. There are three models: HGJ--I, HGJ-II, HGJ-III.

The hot air enters into the bottom of the drier in tangent direction. Under the driving of the stirrer, a powerful rotating wind field is formed. The paste state materials enter into the drier through the screw charger. Under the powerful function of the stirring vanes at high-speed rotation, the materials are distributed under the function of strike, friction and shearing force. The block state materials will soon be smashed and contact the hot air fully and the materials are heated and dried. The dried materials after the de-watering will go up with the heat-air flow. The step rings will stop and keep the big particles. Small particles will be discharged out of the drier from the ring center and will be restored by the cyclone and dust remover. The not-fully-dried or big piece materials will be sent to the wall of the equipment by centrifugal force function and be smashed again after they fall down to the bottom.

Characters:
1.Drying material. It adopts the reheating and crycle system and intensify the speed of transfer of heat and quantity.
2.Feeding the machine automatically, high speed of hot air stream, high strength of drying, small dust, and high efficiency
3.Satisfying the requirement of biomass briquette processing the first time when the moisture content is up to 40%. Comparing with other dryer (which normally takes 2-3 times) it reduces the labor forth.

Henan Kingman M&E Complete Plant Co., Ltd(KMEC) has been dedicatedly engaged in manufacturing and supplying biomass processing equipment for more than two decades. We focus on technology improvement and innovation. KEMC is the biggest production base of biomass briquette processing equipment in China. We welcome more people to participate in our career.


---------------------------------------------------------------------------------------

CPFSJ hammer mill
It, different from crusher with cutterhead, is popular with pulverizing tree trimmings, straw, wood chips and other materials with diameter of not more than 50mm. Powder from the pulverizer can stand at 3-5mm in fineness.