Wood Crusher Machine

DPFSJ crusher  machine (driven by diesel engine)
This is a combination of grinder and crusher. That is to say, small tree twigs and branches can be smashed into pieces and then ground further simultaneously. With the features of less floor space occupation yet high efficiency and stable performance, the machine can be moved flexibly.

The crusher machine can be used separately or alternatively put into use as a part of briquetting process.


Wood Crusher Machine for making sawdust is a advanced machinery for sawdust which is used to produce edible fungus, or sawdust board raw material, man-made charcoal raw material, paper-making material. 

Click here to see the working video of wood crusher machine.

Parameter Sheet:

Model	Name	Power(hp)	Yield(kg/h)	Packaing Size(m)	GW(kg)	NW(kg)
DPFSJ-05	DPFSJ Crusher600	15	400-500	1.7*1.02*1.66	420	370
DPFSJ-06	DPFSJ Crusher600	18	500-600	1.8*0.84*1.26	450	400

Attention:
1. Turn on the moveable biomass crusher to ensure the direction of rotation is correct.
2. The knife-edge should protrude out of the cutterhead by 2-4mm when the cutters are installed and then the bolts tightened. The outreach of all the cutters shall remain the same length.
3. Once the pressure bolts are worn-out, they shall be replaced immediately to prevent from skidding.
4. Before putting in raw material, ensure no impurities fall down inside.

DPFSJ crusher machine (driven by motor)
It is combined with functions of synchronized grinding and pulverizing. With the features of less floor space occupation, high efficiency and stable performance, the machine can be moved flexibly.
The wood raw material shall be small in diameter of less than 200mm.
And by adjusting the cutter position, powder of different size can be obtained.
The crushing machine can be used separately or alternatively put into use as a part of briquetting process.
 
 

Parameter sheet:

Model	Name	Power(kw)	Yield(kg/h)	Packing Size(m)	GW(kg)	NW(kg)
DPFSJ-01	DPFSJ Crusher400	11	200-300	1.23*0.6*1.14	275	240
DPFSJ-02	DPFSJ Crusher600	11	400-500	1.23*0.81*1.14	375	325
DPFSJ-03	DPFSJ Crusher600	15	500-600	1.25*0.85*1.15	400	350
DPFSJ-04	DPFSJ Crusher600(with cyclone)	15	400-500	1.74*1.05*1.66	760	725
DPFSJ-07	DPFSJ Crusher800	22	600-800
DPFSJ-08	DPFSJ Crusher800	18.5	700-900
DPFSJ-09	DPFSJ Crusher800(with cyclone)	18.5	600-800
DPFSJ-10	DPFSJ Crusher800(with cyclone)	22	700-900
DPFSJ-11	DPFSJ Crusher1000	30	800-1000	1.8*1.05*1.4	1200	1100
DPFSJ-12	DPFSJ Crusher1000(with cyclone)	30+5.5	800-1000	2.4*1.2*2.4	1550	1450

Note: moisture content of raw material should remain about 40%.

Attention:
1. Turn on the moveable biomass crusher to ensure the direction of rotation is correct.
2. The knife-edge should protrude out of the cutterhead by 2-4mm when the cutters are installed and then the bolts tightened. The outreach of all the cutters shall remain the same length.
3. Once the pressure bolts are worn-out, they shall be replaced immediately to prevent from skidding.
4. The sieve shall be altered with different mesh size in case that material is not pulverized with uniform size.
5. Before putting in raw material, ensure no impurities fall down inside.

The wood making machine can crush many kinds of wood, branches etc into sawdust directly. It also can be used to crush bamboo, straw, couch grass, sorghum straw etc. The final products can make high density board,small flakeboard,and the material edible mushrooms or charcoal making etc.