Requirements on internal driving parts of briquette machine

Briquette machine is the equipment that make briquettes with raw material under the condition of high temperature and high pressure. The production of briquette machine has high processing speed and large extrusion density. Good sealing of the internal driving part is the first requirement in



the production of briquette machine. Good sealing effect refers to the absolute leakproofness at normal temperature and pressure and keep the dust out. Lubrication is in the second place, which effects on the gear of briquette machine. Fill lubricant according to the transmission speed of production to keep plenty of lubricating oil in the machine body for driving and heat dissipation. Due to the different amount of oil needed in each machine, we should determine the amount of lubricating oil according to the production speed. Requirements on the sealing and lubrication can improve the production of briquette machine, save the production cost and improve the economic benefit.
 
The drying machine is a necessary equipment in the production of briquette machine. The main function of the drying machine is to dry the moisture of the material. Grasping every detail of the dryer is a must for every operator of briquette machine. Only if having a deep understanding of the attention of the dryer, you are able to prevent it when you are operating the dryer. Usually the first thing we need to do when we operate the dryer is the feeding gate. Before operation, we need to open the feeding gate first and put the material to be dried in the drum, then close the feeding gate tightly. The reason to close the door tightly is to prevent the material from flying out of the machine during the operation. It is also important to note that when you remove the drying materials, make sure that the machine completely stops.