The necessity of cleaning the carbonizing furnace after carbonization

The quality of charcoal is the most concern of manufacturers of wood briquette machine, since the quality of charcoal determines the sales price. Advanced carbonizing technology and equipment maintenance can effectively enhance the quality of charcoal. The following is about the cleanliness of the carbonizing furnace.



Affected by high temperature carbonization, the bottom and top of carbonizing furnace would be sticky with a small amount of ash composition after each carbonizing process. Most of the ash composition comes from the ash impurities on the surface of semi-finished briquette. For individual special circumstances, for example, untight seal welding of carbonizing furnace, the ash impurities of external environment would also mix into it easily. Though residues in the carbonizing furnace are seemingly insignificant, it will seriously affect the quality of carbonizing in the production. If residues in carbonizing furnace have not been cleaned in the secondary carbonizing process, once the temperature of carbonizing furnace reaches 300 degrees, the ash composition at the top and bottom of carbonizing furnace would fall due to the high temperature of carbonization, and the drop ash composition would then stick on the surface of semi-finished products, eventually the ignition point of wood briquettes produced in the environment would be very low and the quality is inferior.

To stabilize the carbonizing quality of carbonizing furnace, we need to clean the ash remaining in the carbonizing furnace after each processing. Only ensures the cleaness of the carbonizing furnace, the quality of charcoal can not be affected by ash impurities. Therefore, after each use, it is necessary to clean the carbonizing furnace.