Notices in the operation of sawdust briquette machine

Before the operation of sawdust briquette machine, the operator must study and master the skills of processing. Improper operation would cause machine damage and shorten the service life of sawdust briquette machine. Therefore, we summarized the matters needing attention in the operation of sawdust briquette machine and hope it giving you some help:



1, Before starting the machine, the operator should turn the belt by hand to see whether there is stuck.
2, The operator should tighten the screw and the three top thread in the inner sleeve of the heating cylinder first before starting the sawdust briquette machine.
3, At the end of continuous working of sawdust briquette machine, discharge the materials in the hopper and turning reversed for a minute before stopping.
4, When restarting the production, heating the temperature of the heating cylinder up to 350 ℃ and then start the sawdust briquette machine. Feed less material before the first briquette is produced. Then, increase the amount of feeding.
5, Be sure to check the oil amount in the oil cylinder. If the oil is insufficient, the operator should add enough oil before starting the machine. If oil leakage is found, the operator should change the oil seal in time.
6, During the production, the operator needs to pay attention whether the motor current and voltage is normal in case the motor damage.
7, If the screw propeller can't turn, the operator should stop the machine immediately and remove the materials in the hopper. Then, continue to heat up and rise the temperature 20 ℃ higher than the original temperature. Then, start the machine and operate according to the original steps.
8, It is forbidden to stand in front of the discharging mouth in the operation of sawdust briquette machine.
9, The electrical lines should be kept dry and clean. The power supply should be immediately cut off after stopping the machine.
10, Stone and iron filings are forbidden to enter into the hopper. When something abnormal is found , stop the machine immediately.
11, Oil all the lubrication parts every two months.
12, It is forbidden to the machine if the machine body is not in good grounding so as not to cause harm.

Besides sawdust briquette machine, when using other briquetting machinery like straw briquette machine to produce biomass briquettes, the operator should also follow the content mentioned above in order to improve the working efficiency and prolong the service life of briquette machine. If you have any other questions about the briquette machine and briquette plant, please feel free to contact us.
-----------------------------------------------------------------------------------------------------------