The propeller angle of sawdust briquette machine should be changed with different raw materials

A wide range of raw materials can be used in the production of sawdust briquette machine, such as branches, cotton stalk, sawdust and other materials containing lignin. Since the size and hardness of raw materials are different, the angle of the propeller in sawdust briquette machine should be adjusted properly. In the production of sawdust briquette machine, the propeller used in the production line should be different when using different raw materials to produce high quality briquettes and charcoal.


 
It is also very important to operate the sawdust briquette machine correctly, especially the control of the temperature. The difference in temperature has a lot to do with the quality of briquettes produced. If the temperature is controlled properly, problems like cracking will rarely appears in the production, thus improving the yield. (How to make activated charcoal from briquettes?)

The main function of temperature in the production of sawdust briquette machine is to control the raw material. It can control the softening degree and viscosity of raw materials. If the temperature is too low, the viscosity of raw material would be lower and the briquettes produced would fracture. While if the temperature is too high, the raw material would be too soft that the briquette produced does not conform to the requirements.
                                                            
For different raw materials, the required temperature within the briquette machine is also different. For example, the processing temperature of straw, rice husk and other materials is about 300-320℃, and for raw materials such as wood, the temperature is 260-300℃. Thus, in the production of sawdust briquette machine, the operator must pay attention to the temperature control to ensure the stability of the briquette machine production line.