The solution to fragile charcoal caused by high ash content

In the process of production of charcoal with sawdust briquette machine, if the ash content of charcoal after forming is higher, it would be fragile when using and transporting. Then, how to solve this problem?



The main reasons for the high ash content of charcoal can be that the raw materials are not clean, the raw materials have a high content of ash, high carbonizing temperature and too long time of raising temperature. The best way to solve the problem is to control the transportation of raw materials so as to ensure that the raw materials are not contaminated during the transportation process. The storage conditions of raw materials should avoid the pollution of sand and soil, and the source of raw materials should also be controlled.

The selection of materials should avoid the rice husk, straw and weeds, which have relatively large ash content and cannot be applied to the barbecue industry. They can only be used in industrial production.

High carbonization temperature of carbonizing furnace would also cause excessive ash content of charcoal. Reasonable temperature should be achieved in the carbonization process. The carbon elements would combine with hydrogen and oxygen and escape when the temperature is too high. As a result, the ash content of the charcoal would increase relatively.

Above are the causes and solutions to the high ash content of charcoal produced by briquette machine. If you have other problems in the production of briquettes and charcoal, you can contact us by emails. We provide professional peanut shell briquettes and charcoal production equipment of different models, including wood crusher, drying machine, briquette machine, carbonizing furnace, etc.