Technical parameters of supporting equipment of briquette machine

In the production process of charcoal, wood crusher machine, drying machine, briquette machine, carbonizing furnace and other equipment should be used. The operation of these devices directly affects the quality of the charcoal. So the equipment must be kept under optimal working conditions to produce high-quality charcoal.



In the production process of the briquette machine, the wood materials are mainly used as the raw materials. The first step for making charcoal is to crush the large wood materials into small pieces. Then, the crushed materials need to be dried by the drying machine and pressed into briquettes by the briquette machine. The briquettes produced can be further carbonized into charcoal. Then, how to set the technical parameters for each device?

Working parameters of full set of briquette machine:
1. The particle size shall be controlled below 10mm after being crushed by the crushing machine;
2. The humidity control of the dryer ensures that the moisture content of wood chips is 6% to 12%;
3. The carbonizing temperature should be 550 degrees - 600 degrees.

Briquette machine, as its name implies, is a device for making briquettes. The briquette machine is also called sawdust briquette machine. It mainly takes corn stalk, cotton straw, corn core and other raw materials to make briquettes. Briquette machine is an environmentally friendly equipment since it can avoid the burning of straw and protect the environment. The briquettes produced can be used to replace the coal. These advantages determine the rapid development of briquette machine in recent years.

The following are five advantages of the biomass briquette machine produced by our company:
1. High production capacity, low price and low power consumption;
2. The material is suitable for the forming of various raw materials, and the straw length ranges from powder to 50mm, and the moisture content is between 5% to 30%.
3. Fully automatic electric heating device can adjust the humidity of the material to solve the problem of blockage and non-molding;
4. The bilateral rotation of thrust bearing is used to automatically adjust the pressure angle to ensure the stability of the material forming.
5. High degree of automation with less labor. Manual feeding or conveyor can be used to feed the materials.