Charcoal production process and matters needing attention

The steps of making charcoal are mainly five steps -- crushing raw materials, drying, briquettes making, carbonization, and charcoal cooling. Charcoal of different shapes can be made according to the requirements of the production with briquette machine production line.


 
In these processes, some steps are not necessary and they can be directly omitted according to the different raw materials used. If sawdust is used, there is no need to crush, and the material obtained is delicate enough, so you only need to make the briquettes first. Drying is also unnecessary, drying or not is determined according to the moisture content of raw materials. The selection of the equipment is determined by the situation, if you don't need to crush or dry, then you can save this part of the investment. 
 
After carbonization, you can get the finished charcoal. To get high quality finished charcoal, it is recommended to use the large smokeless carbonizing furnace of our company. It has high efficiency, good quality, environmental protection and energy saving. The charcoal need for cooling after carbonization. Pay attention to open fire or incomplete combustion to prevent continued combustion after opening the can, resulting in failure of carbonization.
 
We can configure the briquette machine production line according to your requirements on the basis of saving investment and make better charcoal production. If you have any problems in making briquettes and charcoal, you can contact us by emails to get more information.
---------------------------------------------------------------------------------------------------------