The importance of quick wear parts in briquette machine
The quick wear parts of
briquette machine include the screw propeller, heating ring, taper sleeve and sleeve. A set of high quality quick wear parts can ensure smooth operation and high efficiency of briquette machine. The internal forming part of briquette machine produced by our company is made of wear resistant materials with high tech that continuous production can be realized without deformation of briquettes. Besides, it improves the service life evidently, saves the production cost and further improves the working efficiency of briquette machine.
The vital part in the briquette machine determines the briquetting density of briquettes, the shape of briquette produced is closed related to the propeller. Improper angle or front end wear of propeller would lead to changes in the shape of briquettes. Wear on the propeller often occur in the production of briquette machine, thus we should check the propeller regularly. Generally, the maintenance of propeller should be made after working for 15 to 20 shifts. The maintenance cycle should be shortened if the using frequency is higher in a period of time to ensure normal production of briquette machine. The forming shape and density of briquettes would be greatly influenced if the propeller goes wrong. Therefore, the inspection and maintenance of propeller in briquette machine is quite necessary. Besides, when repairing the propeller, it is recommended that you should use the wear resistant electrode to repair. Because the propeller is used to extrude materials for molding, the wear resistance of which is quite important. After repairing, the gauze should be used to polish the propeller to make its surface smooth so that briquettes produced also have smooth surface.
Taper sleeve is also one of the quick wear parts, its general service life is more than half a year. The taper sleeve is inserted in the molding cylinder of tight fit, thus it is very difficult to get out. The way to remove the taper sleeve is to use a steel welded on the inner wall of the taper sleeve and then watered. Then, it can be removed by tapping lightly using the principle of thermal expansion.
Due to the high temperature extrusion in the working process of briquette machine, the front end would wear seriously. Under that circumstances, KMEC efforts from the quality of quick wear parts of briquette machine. We have made some targeted technological alteration through the observation and adjustment of our technical staff. We focus on the variables of front end of the propeller and material extrusion to control of extrusion pressure effectively, which greatly improves the service life of the propeller. The propeller after optimization can realize continuous production and more conducive to the operation.
------------------------------------------------------------------------------------------------------------
-lp.jpg "Wood Crusher Machine")
