Why is the briquette produced by the briquette machine bent?

The customer who has just put into the briquette machine production consulted such a question, why the briquette produced by the briquette machine is bent? Generally speaking, the briquette produced by the briquette machine should be straight, so if the briquette is bent, the quality will certainly be affected. What are the causes of that case?


 
In fact, there are two main reasons for the bending of the briquettes:
1. The accessories of briquette machine are not running normally.
The gap between the section of the propeller and the forming cylinder of briquette machine will affect the forming resistance of the raw materials, resulting in uneven pressure flow rate of the foundation when the raw materials pass through the propeller, further resulting in the extrusion deformation of the briquettes produced. Therefore, before the briquette machine works, it is necessary to check whether the motion combination of the parts of the briquette machine is normal.
 
2. The moisture of raw material is not up to standards.
Moisture in the raw material has a certain effect on briquettes. If the moisture content of raw material is too high, the plastic forming standard can not meet the standard hardness in the process of making briquettes. Therefore, the raw materials should be dried by the dryer to make the moisture content reach the qualified standard before making briquettes.
 
We provide high quality equipment for making briquettes and charcoal, including the wood crusher, drying machine, briquette machine, carbonizing furnace, etc. Contact us by emails to get more information.
--------------------------------------------------------------------------------------------------